Re: [asterisk-users] Registration state: Failed

well, then i would recommend to see "full" log in debug mode that might give some clue. if you have not done this before you can uncomment line starting with "full=>" in the logger.conf... the log will be the usual /var/log/asterisk/ directory.

 

Thanks,

 

Vivek 

 

On 11/30/07, Newbie <newbie@pbxsoftwares.com> wrote:

Hi,

there is no problem with X-Lite, the problem is SPA-3102 shown:

 

Line 1:

Registration Status: Failed

 

PSTN Line 1:

Registration Status: Failed

 

I also had added 1 more extension 251..then tried to call 251 from 250 by using X-Lite and it works perfectly.. so that's why I am sure there is no problem with X-Lite .. what I suspect is the problem on Registration process in AsteriskNow..

 

since I am very new with this.. I don't know why this problem occurs ... could any body please help?

 

Thanks & Regards

Winanjaya

 

[general]

context=default
allowoverlap=no
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
videosupport=yes
disallow=all
allow=ilbc
allow=gsm
allow=ulaw
allow=h261
allow=h263
allow=h263p
register=998:1234@line1/998
register=999:1234@pstnline1/999

[line1]

type=peer
host=dynamic
defaultip=172.16.1.74
fromuser=998
secret=1234
fromdomain=172.16.1.169

 

[line2]

type=peer
host=dynamic
defaultip=172.16.1.74
username=999
secret=1234
fromdomain=172.16.1.169

 

Command> sip show peers  Name/username              Host            Dyn Nat ACL Port     Status                pstnline1/999              (Unspecified)    D          0        Unmonitored            line1                      (Unspecified)    D          0        Unmonitored            250/250                    172.16.1.88      D          27778    Unmonitored            2500                       (Unspecified)    D          0        Unmonitored            251                        (Unspecified)    D          0        Unmonitored            5 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 4 offline] 

 

 

----- Original Message -----

From: Vivek Shrivastava

To: Newbie ; Asterisk Users Mailing List - Non-Commercial Discussion

Sent: Saturday, December 01, 2007 11:34 AM

Subject: Re: [asterisk-users] Registration state: Failed

 

Hi,

 

x-lite has extensive debug facility you can turn that on in the advanced options, that probably will give better understanding as what is going on from x-lite side. i also have experienced the same but that involved firewall and NAT issues.

 

Thanks,

 

Vivek

 

On 11/30/07, Newbie <newbie@pbxsoftwares.com > wrote:

Dear Support,

 

I am running AsteriskNow + X-Lite as my SoftPhone and SPA-3102 connected with PSTN line.

 

I have 3 extensions:

 

250 -> my extension

998 -> I configured as Line 1 in SPA-3102

999 -> I configured as PSTN Line 1 in SPA-3102

 

I have created 998 and 999 to the user extension list of the AsteriskNow

 

why I still got Registration state: Failed for both Line 1 status and PSTN Line status ?

 

 

my topology is below:

 

Users <--> AsteriskNow <--> SPA-3102 <--> PSTN line

 

Please help

 

Thanks  a lot in advance

 

Regards

Winanjaya

 

 

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users