[asterisk-users] Annoying PRI Channels Restarting Message

Hi all, i have recently setup a p2p t1 using sangoma t1 cards and asterisk 1.4.  Its working great but i am getting an annoying message every little while in asterisk:

 

[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/16 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/17 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/18 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/19 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/20 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/21 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/22 restarted on span 2
[Nov 23 19:17:57] VERBOSE[6487] logger.c:     -- B-channel 0/23 restarted on span 2

 

Basically this goes through all 23 channels and then says its was successfully restarted. 

 

 the link doesnt appear to be going down because there is nothing in the system log that normally comes up when the link actually goes up or down.  this appears to be some asterisk thing.  its not affecting calls as far as i can tell and doesnt seem to happen when the channels are in use.

 

Any ideas?  Can this be ignored?  If so, can i safely disable this by changing it to a debug message in the code?  Thats what i did with an annoying message caused by setting ext 700 as a orbit on a snom phone.

 

Thanks

 

Mike